× Close

High Voltage (HVI) ALT-120/60: Hipot Aerial Lift Tester

$0.00

High Voltage ALT-120/60 Hipot Features:

  • Secondary connected 2 Range Voltmeter: 0-30/60kV & 0-60/120kV
  • 2 Range Current Meter: 0-250uA and 0-1.0mA with x1, x10, x100 multipliers
  • Full 7.2 kVA, 60kV tap for bucket liner testing
  • Fixed overload set to 120% of variable transformer rated output current
  • Transit protected meters prevent meter damage between test sites
  • Guard/Ground circuit for accurate leakage current measurement
  • Gapped core transformer design for capacitive load compensation
  • Zero Start and External safety Interlock provisions
SKU: hvi-alt-120-60 Categories: , , ,

More Information

The High Voltage ALT-120/60 is primarily designed for testing the dielectric strength of aerial lifts, booms, bucket trucks and liners per the ANSI 92.2 standard

With a continuously adjustable AC voltage, 2 range voltmeter, multi range current meter and built in timer, the ALT Series are also a great choice for a pass/fail, AC over-voltage withstand testing on larger capacitive loads such as switchgear, buss duct or other substation apparatus. A gapped core transformer for up to 7.2 kVA of output power with the draw of 3.6 kVA so the hipot can be powered by a 30A, 120Vac or 15A, 230Vac input. For lower power requirements please see our PFT Series and ABT Series. For higher power requirements see our FPA, HPA and PAR lines.

Specifications:

Input: (ALT-120/60) 120 V, 60 Hz, 30 A
(ALT-120/60F) 230 V, 50/60 Hz, 15 A
Output: 0-120kV AC / 0-60 kV AC, 3.6 kVA resistive load
Up to 7.2KVA capacitive load (1.3 nF @ 120kV or 5.3nF @
60kV, 60 Hz) Output current is reduced at lower voltages
Duty: 7.2 kVA: 1 hour ON, 2 hour OFF
4 kVA: continuous
Voltmeter: 3.5”, scaled 0-30/60kV & 0-60/120kV kV AC, ±2% F.S.
Current Meter: 3.5”, scaled 0-250uA and 0-1.0mA ±2% F.S. with rangemultipliers of x1, x10, x100
Distortion: Less than 5%
Size and Weight:
(W x D x H)
Case:
21 x 11.25 x 15.25 in., 46 lb.
534 x 286 x 387 mm, 21 kgHV Tank:
15.5 x 15.5 x 27.5 in., 160 lb.
394 x 394 x 699 mm, 73 kg
Output Termination Top toroid (0-120 kV)
1 inch ball side tap (0-60 kV)
Scope of Supply 20ft black ground lead, 20ft shielded return cable, external interlock plug, handtruck, operations manual, calibration certificate

Documentation:

Equipment Brochure


Additional information

Hot Product

Home Page Item?

Manufacturer

UOM - Unit of Measure

Reviews

There are no reviews yet.

Be the first to review “High Voltage (HVI) ALT-120/60: Hipot Aerial Lift Tester”

Your email address will not be published. Required fields are marked *