× Close

Vanguard EZCT-2000C: Circuit Breaker Test Set

$0.00

Designed specifically for CT testing, the Vanguard EZCT-2000C has the following outstanding features that can greatly increase productivity and save time during the commissioning stage:

  • Performs CT excitation, current-ratio, polarity, and phase angle tests
  • Measures insulation resistance and winding resistance of the CT secondary windings
  • Measures the CTs load burden
  • Standalone or computer-controlled via USB or Bluetooth wireless interface
SKU: EZCT-2000C Categories: ,

More Information

The EZCT-2000C is Vanguard’s third-generation microprocessor-based current transformer test set

Designed specifically for CT testing, the EZCT-2000C has the following outstanding features that can greatly increase productivity and save time during the commissioning stage:

  • Performs CT excitation, current-ratio, polarity, and phase angle tests
  • Measures insulation resistance and winding resistance of the CT secondary windings
  • Measures the CTs load burden
  • Standalone or computer-controlled via USB or Bluetooth wireless interface

The EZCT-2000Cs test leads can be connected to all the CT output terminals, and the complete CT test can be performed automatically without any operator intervention.

  • Performs CT excitation, current-ratio, polarity, and phase angle tests
  • Measures insulation resistance and winding resistance of the CT seconday windings
  • Measures the CT’s secondary burden
  • Test record header information including company, substation name, circuit ID, manufacturer, CT serial number, operator name, and test record-comments
  • Built-in 4.5-inch wide thermal printer
  • Plot Multiple Saturation Curves
  • Stores up to 128 CT test plans and 140 test records internally
  • USB, Bluetooth, and USB Flash drive interface

Specifications:

TYPE – Portable current-transformer test set

PHYSICAL SPECIFICATIONS – 19″W x 13″H x 16″D (48.3 cm x 33cm x 40.1 cm); Weight: 73 lbs (33.1 kg)

INPUT POWER – 100 – 120 Vac or 200 – 240 Vac (factory pre-set), 50/60 Hz

MEASUREMENT METHOD – IEC 60044-1, IEC 61869, ANSI/IEEE C57.13.1, and ANSI/IEEE C57.12.90

OUTPUT TEST VOLTAGES – 0 – 50 Vac @ 10A max, 0 – 300 Vac @ 10A max, 0 – 500 Vac @ 5A max, 0 – 1200 Vac @ 1.2A max, 0 – 2000 Vac @ 1A max

VOLTAGE READING RANGE – 0 – 2,200 Vac; Accuracy: ±1.0% of reading, ±1 volt

CURRENT READING RANGE – 0 – 10A; Accuracy: ±1.0% of reading, ±0.02A

CURRENT RATIO RANGE – 0.8 – 999: 0.1%, 1000 – 1999: 0.3%, 2,000 – 4,999: ±1%, 5,000 – 10,000: ±1.5%

PHASE ANGLE MEASUREMENT – 0 – 360 degrees, Accuracy: ±1.0 degree

RESISTANCE READING RANGE – 100 micro-ohms – 30 ohms; Accuracy: 2% of reading, ± 1 count, ± 10 micro-ohms

INSULATION RESISTANCE READING RANGE – 2 Mega-ohms – 500 Mega-ohms; Accuracy: 3% of reading, 500 – 1000 Vdc test voltage

DISPLAY – Back-lit LCD Screen, 240 x 128 pixels; 114mm x 64mm, Viewable in bright sunlight and low-light levels

PRINTER – Built-in 4.5-inch wide thermal printer

COMPUTER INTERFACES – One RS-232C port (115k baud), One USB port

INTERNAL TEST RECORD STORAGE – Stores 140 test records. Each test record may contain up to 10 sets of excitation, resistance and ratio data

INTERNAL TEST PLAN STORAGE – Stores 128 test plans. Each test plan can store 10 excitation test voltage and current settings

SAFETY – Designed to meet UL 61010A-1 and CAN/CSA C22.2 No. 1010.1-92 standards

ENVIRONMENT – Operating: -10° to 50° C (15°F to +122° F); Storage: -30° C to 70° C (-22°F to +158° F)

HUMIDITY – 90% RH @ 40°C (104°F) non-condensing

ALTITUDE – 2,000m (6,562 ft) to full safety specifications


Documentation:

Equipment Brochure


Additional information

Manufacturer

UOM - Unit of Measure

Reviews

There are no reviews yet.

Be the first to review “Vanguard EZCT-2000C: Circuit Breaker Test Set”

Your email address will not be published. Required fields are marked *