× Close

High Voltage (HVI) PTS-75: DC Hipot Tester

$0.00

With the High Voltage PTS-75 DC Hipot Tester, dielectric strength and insulation resistance testing are combined into one instrument saving time, money, size and weight.

Equipped with a 5-range current meter scaled 0 – 1 dc microamps for accurate current measurement down to a 10 nanoamp resolution in the x1 range.

More Information

The High Voltage PTS-75 DC Hipot Tester is a combination high voltage DC proof tester and megohmmeter

Using the alternate scale on the current meter allows the PTS Series to double as a Megohmmeter up to 7.5 teraohms, scaled 100-1 megohms, insulation resistance can be taken at any voltage. An accurate 2 range voltmeter rounds out the standard instrumentation. Additional features include ruggedized anti-static and transit protected meters, rugged single piece design with foam padded handles, full-wave bridge rectifier, internal shorting solenoid with discharge resistors, and is CE marked. For other voltage options, please see the rest of our PTS Series which range from 15kV to 600kV DC.

Features:

  • 20 foot (6 meter) shielded output cable, ground and return leads
  • 5 range current/megohm meter for accurate leakage current
  • Megohm readings at any output voltage up to 7.5 teraohms
  • Full-wave bridge rectifier
  • Internal HV Shorting Solenoid with discharge resistors
  • Automatic transit protected meters with Anti-static glass face
  • Under lid storage for all accessories
  • External safety and zero start interlocks

Specifications:

Input: PTS-75 – 120Vac, 60Hz, 10A, PTS-75F5 – 230Vac, 50Hz, 5A PTS-75F6 – 230Vac, 60Hz, 5A, +/-1% input voltage regulator
Output: 0 – 75 kV DC @ 10 mA, negative polarity, positive ground Full Wave Bridge Rectification
Duty: Continuous, capacitive charging
Voltmeter: 3.5”, scaled 0 – 37.5/75 kV DC, ±2% F.S.
Current Meter: 3.5”, scaled 0 – 1.0 μAdc, ±2% F.S. with multipliers of x 1, x 10, x 100, x 1 k, x 10 k. Guard/ground load return
Megohmmeter: Scaled 100 -1 MΩ ±2% F.S. with multipliers of x 0.1, x 1, x 10, x 100, x 1 k
Size & Weight:
(W x D x H)
14 x 11 x 18 in., 68 lb. 356 x 279 x 457 mm, 31 kg
Output Termination: 20 ft. (6 m) shielded output cable with alligator clamp
Scope of Supply: 20ft red test lead, 20ft black test leads, 10in safety ground stick, external interlock plug, operations manual, calibration certificate

Documentation:

Equipment Specifications


Additional information

Hot Product

Home Page Item?

Manufacturer

UOM - Unit of Measure

Reviews

There are no reviews yet.

Be the first to review “High Voltage (HVI) PTS-75: DC Hipot Tester”

Your email address will not be published. Required fields are marked *